- Occupational Health and Safety Regulation 2001
- Status information
- Chapter 1 Preliminary
- 1 Name of Regulation
- 2 Commencement
- 3 Definitions
- 4 Application of Regulation
- 5 Meaning of “control” of risks
- 6 Application of provisions providing for alternative duties if primary duty not reasonably practicable
- 6A Duties to apply so far as is reasonably practicable
- 7 Application of provisions of Part 2 of the Act (relating to general duties of certain persons) to persons having duties under this Regulation
- 8 Responsibilities held by more than one responsible person
- Chapter 2 Places of work—risk management and other matters
- Note
- 9 Employer to identify hazards
- 10 Employer to assess risks
- 11 Employer to eliminate or control risks
- 12 Employer to review risk assessments and control measures
- 13 Employer to provide instruction, training and information
- 14 Employer to provide supervision
- 15 Provision by an employer of personal protective equipment
- 16 Employer to obtain information
- 17 Employer to provide for emergencies
- 18 Employer to provide amenities
- 19 Maintenance of amenities and accommodation
- 20 Employer to provide first aid facilities and personnel
- Chapter 3 Workplace consultation
- Note
- 21 Definitions
- 22 Setting up consultation arrangements (section 15 (f) of the Act)
- 23 Workgroups represented by OHS committees or OHS representatives
- 24 Minimum requirements for OHS committees
- 25 Minimum requirements for election of OHS representatives
- 26 Other agreed arrangements (sections 16 (c) and 17 (3) of the Act)
- 27 Related obligations of employer with respect to duty to consult
- 28 Employees to disclose certain matters
- 29 Procedure for resolving matter that may be risk to health and safety
- 30 Additional functions of OHS committees and OHS representatives (section 18 (d) of the Act)
- 31 Training to be undertaken by members of OHS committees and OHS representatives
- 32 Savings and transitional arrangements
- Chapter 4 Work premises and working environment
- Note
- Part 4.1 Preliminary
- Part 4.2 Work premises
- Part 4.3 Use of places of work
- Note
- Division 1 Working space
- Division 2 Lighting
- Division 3 Heat and cold
- Division 4 Noise management
- Division 5 Atmosphere
- 49A Application to mining workplaces that are mines and to coal workplaces
- 50 Definitions
- 51 Atmospheric contaminants—particular risk control measures
- 52 Unsafe levels of oxygen—risk control measures
- 53 Ventilation—particular risk control measures
- 54 Entry protection—contaminated atmosphere or unsafe levels of oxygen
- 55 Atmospheric monitoring
- Division 6 Working at heights
- 56 Prevention of falls from heights—particular risk control measures
- 57 Falling objects—particular risk control measures
- 58 Scaffolding—particular risk control measures
- 59 Lifts—particular risk control measures
- 60 Brittle or fragile roofs—particular risk control measures
- 61 Building maintenance—particular risk control measures
- Division 7 Fire and explosion
- Division 7A Residual current devices (safety switches)
- 62A Residual current devices—electrical outlet sockets
- 62B Residual current devices—electrical articles
- 62C Testing of residual current devices
- 62D Division extends to controllers of premises
- 62E Division does not apply to electrical supply authority works
- 62F Requirements under the Electricity (Consumer Safety) Act 2004
- Division 8 Electricity
- Division 9 Working in confined spaces
- 65A No application to underground parts of mining workplaces or coal workplaces
- 66 Definitions
- 67 Application
- 68 Entry to or work in or on confined space—particular risk control measures
- 69 Isolation or control of potentially hazardous services—particular risk control measures
- 70 Purging before entry—particular risk control measures
- 71 Safety of atmosphere—particular risk control measures
- 72 Entry permits—particular risk control measures
- 73 Stand-by persons—particular risk control measures
- 74 Emergencies—particular risk control measures
- 75 Entry protection—particular risk control measures
- 76 Atmospheric testing and monitoring—particular risk control measures
- 77 Training
- 78 Record keeping
- Part 4.4 Manual handling
- Part 4.5 Long distance truck driver fatigue
- Chapter 5 Plant
- Note
- Part 5.1 Preliminary
- Part 5.2 Design, manufacture and registration of plant
- Division 1 Design of plant
- Note
- 84 Application
- 85 Manufacturers and importers of plant designed outside the State to ensure that designer’s responsibilities are met
- 86 Designer to identify hazards
- 87 Designer to assess risks
- 88 Designer to review risk assessment
- 89 Designer to control risks
- 90 Guarding—particular risk control measures
- 91 Operational controls—particular risk control measures
- 92 Emergency stops and warning devices—particular risk control measures
- 93 Design of powered mobile plant—particular risk control measures
- 94 Mandatory design standards—particular risk control measures
- 95 Specifying work systems and operator competencies—particular risk control measures
- 96 Designer to provide information
- 97 Designer to obtain information
- Division 2 Manufacture of plant
- Note
- 98 Application
- 99 Importers of plant manufactured outside the State to ensure that manufacturer’s responsibilities are met
- 100 Manufacturer to identify hazards
- 101 Manufacturer to assess risks
- 102 Manufacturer to review risk assessment
- 103 Manufacturer to control risks
- 104 Manufacture of powered mobile plant—particular risk control measures
- 105 Manufacturer to provide information
- 106 Manufacturer to obtain information
- Division 3 Registration of plant
- Note
- Subdivision 1 Registration of plant design
- 107 Application for registration of plant design
- 108 Further information may be requested
- 109 Processing of application
- 110 Cancellation of design registration in certain circumstances
- 111 Design registration number to be provided to certain persons
- 112 Registration under equivalent law
- 112A Savings concerning coal workplaces
- Subdivision 2 Registration of items of plant
- 113 Application for registration of item of plant
- 114 Additional requirements for application to register amusement device
- 115 Processing of application
- 116 Cancellation of registration of item of plant in certain circumstances
- 117 Automatic cancellation of registration
- 118 Renewal of registration
- 119 Registration under equivalent law
- 119A Savings concerning coal workplaces
- Part 5.3 Supply of plant
- Note
- Division 1 Preliminary
- Division 2 Sale or transfer of plant
- Division 3 Hiring or leasing plant
- Note
- 124 Hirer or lessor to identify hazards
- 125 Hirer or lessor to assess risks
- 126 Hirer or lessor to review risk assessment
- 127 Hirer or lessor to control risks
- 128 Maintenance, repair, testing and cleaning of plant—particular risk control measures
- 129 Plant under pressure—particular risk control measures
- 130 Powered mobile plant—particular risk control measures
- 131 Hirer or lessor to keep records
- 132 Hirer or lessor to provide information
- 133 Hirer or lessor to obtain information
- Part 5.4 Working with plant
- Note
- 134 Application
- 135 Installation, erection and commissioning of plant—particular risk control measures
- 136 Use of plant—registration requirements
- 136A Use of plant—particular risk control measures
- 137 Maintenance and repair of plant—particular risk control measures
- 138 Dismantling, storage and disposal of plant—particular risk control measures
- 139 Use of amusement devices—particular risk control measures
- 140 Plant under pressure—particular risk control measures
- 141 Powered mobile plant—particular risk control measures
- 142 Plant designed to lift or move—particular risk control measures
- 143 Employer to keep records
- 144 Employer to provide information
- Chapter 6 Hazardous substances
- Note
- Part 6.1 Preliminary
- Part 6.2 Manufacture of hazardous substances
- Part 6.3 Supply of hazardous substances
- Part 6.4 Use of hazardous substances
- 161 Application
- 162 Employer to obtain MSDS
- 163 Employer to ensure containers are labelled
- 164 Use of hazardous substances
- 165 Employer to provide health surveillance
- 166 Medical practitioner to notify results of health surveillance
- 167 Employer to keep register of hazardous substances
- 168 Employer to record risk assessments
- 169 Employer to keep record of employees exposed to carcinogenic substances
- 170 Employer to provide statement to employees exposed to carcinogenic substances
- 171 Employer to retain certain material as record
- 172 Medical practitioner to retain records
- 173 Employer to identify hazardous substances in enclosed systems
- 174 Employer to provide information
- Chapter 6A Dangerous goods
- Note
- Part 6A.1 Preliminary
- Part 6A.2 Manufacture, import and supply of dangerous goods
- Part 6A.3 Obligations of occupiers
- Division 1 Preliminary
- Division 2 Hazard identification and risk assessment
- Division 3 Particular risk control measures
- Subdivision 1 Stability and interaction with dangerous goods
- 174R Stability of dangerous goods
- 174S Separation of dangerous goods
- 174T Preventing interaction with other substances
- 174U Ignition sources in hazardous areas
- 174V Atmospheric emissions
- 174W Preventing contamination of food and personal products
- 174X Containers for dangerous goods in bulk
- 174Y Containment of spills
- 174Z Transfer of dangerous goods
- 174ZA Impact protection
- Subdivision 2 Preparedness for emergencies
- Subdivision 3 Safety equipment and safe access
- Subdivision 4 Plant, equipment and containers
- Subdivision 5 Provision of information
- Subdivision 6 Placards
- Subdivision 7 Manifests
- Subdivision 8 Serious incidents and other incidents
- Subdivision 9 Notification
- Subdivision 10 Miscellaneous
- Part 6A.4 Obligations of employers
- Part 6A.5 Specific provisions applying to all dangerous goods to which section 135A of Act applies
- Chapter 6B Major hazard facilities
- Part 6B.1 Preliminary
- Part 6B.2 Hazard identification and risk assessment
- Part 6B.3 Duties in relation to major hazard facilities
- Part 6B.4 Notification regarding operation of major hazard facilities and potential major hazard facilities
- 175EA Definition
- 175F Notification by operators and intended operators of major hazard facilities and potential major hazard facilities
- 175FA Notification by operators of potential major hazard facilities of material change
- 175G Content of hazard facility notification
- 175H WorkCover may request further information
- 175I Notification of change of operator of major hazard facility or potential major hazard facility
- 175J Notification assessment fee
- Part 6B.5 WorkCover may determine potential major hazard facilities to be major hazard facilities
- Part 6B.6 Provisional registration and registration of major hazard facilities
- Part 6B.7 Duties of employees at major hazard facilities
- Part 6B.8 Miscellaneous
- 175Y Recording of major accidents, near misses and security breaches
- 175Z Security
- 175ZA Informing, instructing and training employees
- 175ZB Non-employees at the facility
- 175ZC Operator to retain records of training
- 175ZD Records
- 175ZE Providing relevant information to other authorities
- 175ZF Co-ordination of plans and reports
- Chapter 7 Hazardous processes
- Chapter 8 Construction work
- Note
- Part 8.1 Preliminary
- Part 8.2 OHS induction training—construction work
- Note
- 212 Definitions
- 212A Application to mining workplaces and coal workplaces
- 213 Principal contractors to ensure that OHS induction training undertaken
- 214 Employers to ensure OHS induction training undertaken
- 215 Self-employed persons to undergo OHS induction training
- 215A Holder of OHS construction induction training card to produce card
- 216 OHS induction training
- 217 Approval of RTO and persons nominated to conduct general induction training
- 217A (Repealed)
- 218 Suspension and cancellation of approval
- 219 (Repealed)
- 220 Statements of OHS induction training
- 220A OHS construction induction training cards
- 220B Replacement of lost, stolen, damaged or destroyed OHS construction induction training cards
- 220C Cancellation of OHS construction induction training cards
- 221 Former OHS induction training certificates
- 222 Lapsing of currency of OHS training and OHS training statements
- 223 Principal contractors and employers to keep records
- Part 8.3 Special workplace arrangements for construction work
- Note
- 224 Definition
- 225 Responsibilities of contractors to be in addition to responsibilities as employers
- 226 Responsibility of principal contractor to prepare an OHS management plan
- 227 Responsibility to provide safe work method statements—principal contractor and sub-contractors
- 228 Responsibility of principal contractor to keep register of hazardous substances
- 229 Responsibilities of sub-contractors
- Part 8.4 Control of risks arising during construction work
- 230 Application
- 231 Overhead protective structures—particular risk control measures
- 232 Safe means of lowering materials—particular risk control measures
- 233 Formwork—particular risk control measures
- 234 Prevention of structural collapse—particular risk control measures
- 235 Site security—particular risk control measures
- 236 Use of compressed air—particular risk control measures
- 237 Laser work
- Part 8.5 Excavation work—particular provisions
- 238 Definition
- 239 Application
- 240 Protection of stability of excavation work—particular risk control measures
- 241 Potential risks arising from excavation work—particular risk control measures
- 242 Regular inspection mandatory for excavations of 1 metre or more—particular risk control measures
- 243 Caissons and cofferdams—particular risk control measures
- 244 Supervision
- 245 Safe access and egress
- Part 8.6 Demolition work—particular provisions
- 246 Definitions
- 247 Work to be done in accordance with Australian Standard and this Part
- 248 Investigations
- 249 Carrying out demolition work
- 250 Working in or below building being demolished
- 251 Buildings adjacent to public places
- 252 Demolition within confines of building
- 253 Overhead protective structures
- 254 Scaffolding
- 255 Demolition of chimney stacks
- 256 Notification of dangerous work
- Part 8.7 Asbestos—particular provisions
- Part 8.8 Diving work—particular provisions
- Chapter 9 Certification of workers
- Part 9.1A Licences for high risk work
- Division 1 Preliminary
- Division 2 Work for which licences or recognised qualifications are required
- Division 3 Assessment of competency
- Division 4 Approval of registered training organisations
- Division 5 Issue of licences
- Division 6 Suspension or cancellation of licences
- Division 7 Savings and transitional provision
- Part 9.1 Certificates of competency for pesticides, fumigants and certain loadshifting machines
- Division 1 Preliminary
- Division 2 Work for which certificates of competency or recognised qualifications are required
- 270 Requirement to be qualified to do scheduled work
- 271 Exception for trainees
- 272 Responsibility for providing supervision of trainees
- 273 Responsible person’s obligations
- 274 Supervisor’s obligations
- 275 Trainee’s obligations
- 276 Exception for holders of notices of satisfactory assessment
- 277 Exception for maintenance or demonstration
- Division 3 Assessment of competency
- Division 4 Accreditation of assessors
- Division 5 Issue of certificates of competency
- Division 6 Suspension or cancellation of certificates of competency
- Part 9.2
- Chapter 10 Licensing of certain businesses
- Part 10.1 Preliminary
- Part 10.2 Licences required for demolition or asbestos removal work
- Part 10.3 Provisions relating to licences
- Note
- 319 Applications for licences or renewals
- 320 Eligibility for licence
- 321 Determination of applications
- 322 Notice of refusal
- 323 Term of licences
- 324 Licence fees
- 325 Condition of licence relating to supervision
- 326 Amendment of conditions of licences
- 327 Licences to be displayed
- 328 Suspension or cancellation of licences
- 329 Cancelled licences to be returned to WorkCover
- Part 10.4
- Chapter 10A Registration of clothing factories
- Chapter 11 Permits for certain work
- Chapter 12 Miscellaneous
- Part 12.1 Notification of accidents and other matters
- Part 12.2 Prescription of additional serious incidents
- Part 12.3 Notifications of proposed work
- Part 12.4 Exemptions
- Part 12.5 Reviews of decisions
- Part 12.6 Penalty notice offences
- Part 12.7 Other miscellaneous provisions
- 356 False or misleading information in applications
- 357 Additional officers authorised to consent to the institution of proceedings for offences
- 358 Application of Act to mining workplaces and coal workplaces: references to WorkCover
- 358A Sharing of information between WorkCover and Department of Industry and Investment
- 359 Continuation of former OHS shop provisions
- 360 Notes
- 361 Transitional application of sentencing guideline provisions
- 362 Savings and transitional provisions
- Schedule 1 Standards covering design and manufacture of plant
- Schedule 2 Penalty notices
- Schedule 3 Savings and transitional provisions
- Schedules 4, 4A (Repealed)
- Schedule 5 Quantities of dangerous goods
- Schedule 6 Placarding requirements
- Schedule 7 Information to be contained in a manifest
- Schedule 8 Identification of a major hazard facility
- Historical notes
Occupational Health and Safety Regulation 2001
Repealed
version for 7 June 2011 to 31 December 2011 (accessed 1 March 2019 at 08:58)
70 Purging before entry—particular risk control measures
(1) An employer must ensure that, if appropriate, a confined space is cleared of all contaminants by use of a suitable purging agent by which contaminants are displaced from the confined space before a person enters the confined space.(2) An employer must ensure that pure oxygen or a gas mixture in a concentration of more than 21% of oxygen by volume is not used for the purging or ventilation of a confined space.Maximum penalty: Level 4.